ralph

首先是Arca Swiss B-1
1.70 lb的东西能承重90lb,厉害！

b&h上的介绍

A B1 standard single axis ballhead, with panning capabilities. With quick release feature for quick mounting and dismounting of cameras. (Requires camera mounting plate.)

Ever since their introduction over thirty years ago, the Arca Swiss Monoballs have been at the forefront of quality and performance. Today, their unique shape(an ellipse rather than a sphere) is still what separates them from all others. With other ballheads, no matter how good the tension modulation, you invariably will need to increase the tension control as you move the load away from the center. This is because gravity has a greater effect on gear when not perfectly level. You are left with three undesireable options:
1) having tension too tight when the load is level
2) having tension too loose when the load is off-center
3) adjusting the tension every time you move between level and off-center.

The Arca Swiss eliminates the need to constantly modulate the tension, because its elliptical nature corrects it by virtue of its own design. The load stays exactly where you tell it to once locked into position. A separate control is set to apply a constant minimum friction, which allows the photographer the peace of mind that comes with knowing your gear will never move of its own volition. The heavier your gear, the more the advantages of the Arca Swiss become evident. The exquisite finish adds to the exact positioning capacity.

In actuality, there are two types of ballheads available. a) The B1 Series design, which is a single axis rotation with one locking knob; b) the B2 design, which is built on the double axis rotation, allowing movement around two distinct axes due to two separate balls encapsulated into one another and two individual locking knobs. The B1 Series single action ballhead is sold various ways. The "b" economic model, without panning capabilities, the B1 Standard with panning capabilities and the "G" large model, all sold with different camera mounting devices. All Arca ballheads mount onto 3/8"-16 tripod screws.


参考网站
Arca Swiss 介绍网站(可以在bh上订购）
http://www.thefstop.com/equipment/new/arca/arca.html
Kirk 网站
http://www.kirkphoto.com
Wimberley 网站
http://www.tripodhead.com/

上传的图像

 

ralph

大图

上传的图像

 

ralph

2

上传的图像

 

ralph

kirk bh-3
比arca b1便宜100美元
承重10kg毫无问题.
自重,500g

上传的图像

 

ralph

----over----

8848

你打算把大家都弄晕呀！！！！！！！！！

ralph

哈哈
老兄
你吃不消了吧
我的建议，你有买三向的勇气，那么，你还是买球头吧，理由，比三向轻，容易携带，容易使用....足够了吧
当然，如果你愿意花上200-300美元，那我也不反对你上arca的球头，但是注意，200-300美元仅仅包含球头，一个快装板至少50美元。
而且，最关键的问题是，这个东西，国内没有，所以，你还是在慢附图，gitzo中选吧